Construction Steps and Precautions for Glass Mosaic

In people's minds, flat glass is a fragile and transparent material, because the debris is sharp and easy to injure, and the safety is not strong. However, with the development of technology, people can not only fully utilize the natural advantages of float glass, but also adjust its performance to make up for its defects. For example, glass mosaics rely on multiple small float glass stickers to form a large finish, which not only enhances the strength, but also makes the decorative effect better. Many families want to use glass mosaics to decorate interior walls, so we will introduce the construction steps and precautions for glass mosaics to avoid problems during construction.

First, the glass mosaic (mirror glass) construction steps

1.Make sure the construction glass surface is smooth and clean. After laying the baseline, applying the adhesive evenly on the construction surface.

2.According to the order, the mirror glass mosaic is affixed and pressed flat to ensure that every place is compacted and fully combined with the adhesive.

3.After the adhesive is dry, the paper can be torn with a sponge dipped in water to wet the sticker. After the sticker is completely wet, the paper can be torn.

4.Filling the seam with the filler or primer with the tool.

5.Cleaning. Using a wet sponge to clean the extra seam filler attached to the glass mosaic, and then wipe with a dry cloth to complete the construction steps.

Precautions for paving glass mosaic

1.The veneer of glass mosaic shall be strong, clean and free from oil and wax stains. The surface used in painting shall be cut quickly and at least 80% of the original surface shall be exposed.

2.In order to avoid the scratch of crystal mosaic,so it can’t be rubbed against sand and dust.

3.It is recommended to use ceramic tile glue powder or marble glue powder for materials used for paving. The color of glue powder should be white, and the use of other miscellaneous color materials will affect the color of crystal mosaic.

4.Applying the white glue paste to the wall before the construction, and then use the 6*6 tooth scraper to scrape it into a uniform strip of teeth. Then the glue will allow the crystal mosaic to be kneaded and pressed on the wall within the drying time.

5.When ceramic tile adhesive for about 24 hours after solidification, crystal horse title caulking. Crystal glass mosaic seam available color caulking glue to do their favorite fill the gap. When the caulking knife used rubber ash joint sealant completely pressed into the cracks, shall not be left blank. Caulking work is completed, immediately with a damp towel or sponge to glass mosaic surface cleaning.

6. When cutting crystal glass mosaic, high quality diamond glass knife should be used to cut the sheet glass surface.

7. When drilling on crystal glass mosaic, special drilling tools should be used, and water should be added to cool the drilling.

8 .In order to keep the bright crystal of crystal mosaic, don;t use abrasive detergent, wire brush and sandpaper for cleaning, but use household cleaning windows to clean it.