Installation Requirements And Maintenance Of One Way View Mirror

One way view mirror is a float glass that has a high reflectance to visible light.

To install a one-way see-through glass, follow these steps:

1. One way view mirror is divided into positive and negative sides. The front side is a glass mirror for reflecting light. The front side should be oriented towards the monitored room . The reverse side is facing the position of the judge.

2. The intensity of the light in the monitored room should be sufficient to ensure sufficient brightness. The brighter and stronger the light in the monitored room, the more obvious the one-way perspective effect of the glass sheets.

3. In order to achieve the best one-way see-through performance of the flat glass, the ceiling is not installed in the monitoring room in principle, and no other light source is allowed. If there is a window next to the monitoring room, it must be installed with opaque curtains, such as sealed curtains used in hotels. When using, it is recommended to turn off all lights in the monitoring room.

4. If the monitoring room must use the light, it is recommended to use point lights, such as writing desk lamps, to narrow the scope of the light, and to control the light ratio of the monitoring room to the monitored room at 1:3. In the state, or a lower ratio, to ensure that the one-way perspective performance of the sheet glass is intact. Note: The light cannot be mounted directly behind the mirror glass to prevent the image of the personnel in the monitoring room from being reflected on the glass surface.

5. In order to enhance the overall reflectivity of the unidirectional glass, it is recommended to install a spotlight above or below the glass mirror to enhance the overall reflectivity of the glass mirror and enhance the one-way perspective of the glass.

6. The actual distance between the monitored person and the half mirror glass should be kept above ≥1 meter.

7. One way view mirror is special sheet glass. When installing, pay attention to protect the glass mirror. Once the mirror glass is damaged, it cannot be repaired.

One way view mirror maintenance:

Usually do not force the sheet glass surface, in order to prevent the glass sheets surface from scratching, it is best to put a tablecloth. When placing things on flat glass furniture, you should take care and avoid collision.

For daily cleaning, wiping the one way view mirror with a wet towel or newspaper. If it is stained, the half mirror glass can be wiped with a towel, beer or warm vinegar. You can also use the float glass cleaner currently sold on the market. The solution is clean.

One way view mirror cleaning is a cleaning method that uses a cleaning agent to professionally clean unidirectional perspective glass. The method is to use a one-way perspective glass scraper, a water wiper, and a high-efficiency one way view mirror cleaner to completely remove the dirt, and remove the dust on the window frame, the window joint dust and the cement glue with a one way view mirror blade. The cleaning agent contains an antistatic component, and the unidirectional perspective glass after wiping is crystal clear and transparent.