Three Methods to Remove the Stickers on the Glass

After the glass doors, glass windows and glassware in the home are pasted with some stickers, they are always torn off, and it is easy to leave behind stickers, which does not affect the appearance and it is annoying. How to remove the sticker on the glass?

First, Chemical Methods

1) The wind oil removal method can be removed with wind spirits stickers. Apply balsam to the sticker, and after a moment of penetration, wipe off with a dry cloth, leaving no trace. If there is no wind essence, toothpaste can be used instead, but the effect is slightly worse.

2) Hot towel removal method, you can first wet the logo with a hot towel, so that it is soaked, some logo stickers can be easily torn off. "Identified labels that have been exposed to a long period of time and have strong adhesive strength can be removed with special cleaning fluids such as asphalt cleaners if the front Windshield Glass is not coated with solar film." If these scavengers are not available, they can also be soaked with soapy water or detergent powder, which can also achieve complete removal. ”

3) Hydrogen peroxide removal method, hydrogen peroxide can soften the already hardened viscose, use method is to use a towel to dip the hydrogen peroxide, wipe the car mark, repeatedly wipe a few times, over a minute or so can be peeled off.

4) Alcohol removal method. This method is similar to the hydrogen peroxide method. It can be wiped repeatedly with a small amount of alcohol in the car label, but it must not be sprayed directly on the glass, otherwise it will damage the film.

Second, the Physical Method

1) Use the blade to gently scrape off the logo. This method can easily get out of the logo, but it will leave a few scratches on your car. It will be very obvious at night.

2) The blower method, the more children's shoes in the computer city, will find that it will use a hair dryer to blow the tape out of the box. The advantage of this is that there is no trace after the box is opened and it can be restored as it is. This method can also be applied. When we remove the car's logo from the car's glass, use a hot air blower to blow the car's logo. After the rubber under the logo is softened, it can be torn off.

3) The hard plastic sheet method (for example, we use prepaid cards, game cards, membership cards, etc.) is similar to the blade method, because the hardness of the plastic sheet is small, and the damage to the glass is less when the vehicle logo is scratched.

Third, Advance Prevention

1) Use electrostatic stickers, just like the electrostatic screen protectors used on our mobile phones. Before sticking the car stickers, buy an electrostatic sticker is attached to the windshield, and then put Car stickers are affixed to electrostatic stickers. In the following year, only the electrostatic stick should be thrown away.

2) The suction cup is affixed, and the car logo is placed inside the suction cup sticker. The method is similar to the electrostatic sticker, but the suction cup sticker can be reused, and the new car standard can be replaced when the standard is changed in the coming year.